PC 164R LEXAN 沙伯基礎
江浙滬深圳山東福建江西安微河南河北天津重慶等地區蘇州新塑語原廠一級代理分銷商供應 PC 164R LEXAN 沙伯基礎原料，原廠正品，品質保證，共創雙贏！
PC 164R LEXAN 沙伯基礎原材料代理商價格產品介紹:
材料總稱：PC
材料商標名與型號：LEXAN 164R
材料中文名稱：聚碳酸酯
材料生產商：SABIC 沙伯基礎
產品包裝：25KG
材料生產地：美國，南沙
PC 164R LEXAN美國沙伯基礎創新江浙滬一級代理原廠原包/PC簡介
聚碳酸酯(簡稱PC)是分子鏈中含有碳酸酯基的高分子聚合物，根據酯基的結構可分為脂肪族、芳香族、脂肪族-芳香族等多種類型。其中由于脂肪族和脂肪族-芳香族聚碳酸酯的機械性能較低，從而限制了其在工程塑料方面的應用。目前僅有芳香族聚碳酸酯獲得了工業化生產。由于聚碳酸酯結構上的特殊性，現已成為五大工程塑料中增長速度最快的通用工程塑料。
PC 164R LEXAN美國沙伯基礎創新江浙滬一級代理原廠原包/PC化學性能
聚碳酸酯（PC）是碳酸的聚酯類，碳酸本身并不穩定，但其衍生物（如尿素，碳酸鹽，碳酸酯）都有一定穩定性。按醇結構的不同，可將聚碳酸酯分成脂族和芳族兩類。
脂族聚碳酸酯。如聚亞乙基碳酸酯，聚三亞甲基碳酸酯及其共聚物，熔點和玻璃化溫度低，強度差，不能用作結構材料；但利用其生物相容性和生物可降解的特性，可在藥物緩釋放載體，手術縫合線，骨骼支撐材料等方面獲得應用。
聚碳酸酯耐弱酸，耐弱堿，耐中性油。
聚碳酸酯不耐紫外光，不耐強堿。
PC是一種線型碳酸聚酯，分子中碳酸基團與另一些基團交替排列，這些基團可以是芳香族，可以是脂肪族，也可兩者皆有。雙酚A型PC是最重要的工業產品。
PC是幾乎無色的玻璃態的無定形聚合物，有很好的光學性。PC高分子量樹脂有很高的韌性，懸臂梁缺口沖擊強度為600~900J/m，未填充牌號的熱變形溫度大約為130°C ，玻璃纖維增強后可使這個數值增加10°C。PC的彎曲模量可達2400MPa以上，樹脂可加工制成大的剛性制品。低于100°C 時，在負載下的蠕變率很低。PC耐水解性差，不能用于重復經受高壓蒸汽的制品。
PC主要性能缺陷是耐水解穩定性不夠高，對缺口敏感，耐有機化學品性，耐刮痕性較差，長期暴露于紫外線中會發黃。和其他樹脂一樣，PC容易受某些有機溶劑的浸濁。
PC材料具有阻燃性，耐磨？寡趸。
PC 164R LEXAN美國沙伯基礎創新江浙滬一級代理原廠原包/PC物理性能
密度：1.18－1.22 g/cm^3 線膨脹率：3.8×10^-5 cm/°C 熱變形溫度：135°C 低溫-45°C
聚碳酸酯無色透明，耐熱，抗沖擊，阻燃BI級，在普通使用溫度內都有良好的機械性能。同性能接近聚甲基丙烯酸甲酯相比，聚碳酸酯的耐沖擊性能好，折射率高，加工性能好，不需要添加劑就具有UL94 V-0級阻燃性能。但是聚甲基丙烯酸甲酯相對聚碳酸酯價格較低，并可通過本體聚合的方法生產大型的器件。
聚碳酸酯的耐磨性差。一些用于易磨損用途的聚碳酸酯器件需要對表面進行特殊處理。
PC 164R LEXAN美國沙伯基礎創新江浙滬一級代理原廠原包/PC主要優點
1、具高強度及彈性系數、高沖擊強度、使用溫度范圍廣;
2、高度透明性及自由染色性;
3、成形收縮率低、尺寸安定性良好；
4、耐疲勞性佳;
5、耐候性佳;
6、電氣特性優;
7、無味無臭對人體無害符合衛生安全。[5]
PC 164R LEXAN美國沙伯基礎創新江浙滬一級代理原廠原包/PC主要性能
a、機械性能：強度高、耐疲勞性、尺寸穩定、蠕變也。ǜ邷貤l件下也極少有變化）；
b、耐熱老化性：增強后的UL溫度指數達120~140℃（戶外長期老化性也很好）；
c、耐溶劑性：無應力開裂；
d、對水穩定性：高溫下遇水易分解（高溫高濕環境下使用需謹慎）；
e、電氣性能：
1、絕緣性能：優良（潮濕、高溫也能保持電性能穩定,是制造電子、電氣零件的理想材料）；
2、介電系數：3.0-3.2；
3、耐電弧性：120s；
f、成型加工性：普通設備注塑或擠塑。
PC 164R LEXAN美國沙伯基礎創新江浙滬一級代理原廠原包/PC系列
Lexan 201 7.0 MFR, for thicker sections without sinks.
Lexan 203 7.0 MFR, for thicker sections without sinks. Improved flame retardance.
Lexan 221 17.5 MFR, for small, intricate parts. Improved flame retardance.
Lexan 241 10.5 MFR. Improved flame retardance.
Lexan 243 10.5 MFR. UV-stabilized. Improved flame retardance.
Lexan 920 Opaque colors, low viscosity, superior flame retardance.
Lexan 920A Low viscosity injection moldable, flame retardant PC.
Lexan 920ASR More robust design of standard 900 series flame retardant grade.
Lexan 923 Opaque colors, low viscosity, superior flame retardance.
Lexan 923A Low viscosity, flame retardant with exceptional surface.
Lexan 923ASR More robust design of standard 900 series flame retardant grade.
Lexan 940 Opaque colors, medium viscosity, superior flame retardance.
Lexan 940A Medium viscosity, flame retardant PC. Exceptional surface.
Lexan 940ASR More robust design of standard 900 series flame retardant grade.
Lexan 943 Opaque colors, medium viscosity, superior flame retardance.
Lexan 943A Medium viscosity, superior flame retardance.
Lexan 943ASR More robust design of standard 900 series flame retardant grade.
Lexan 950 Opaque colors, high viscosity, superior flame retardance.
Lexan 950A Transparent, clear and colors, high viscosity, flame retardant with exceptional surface.
Lexan 953 Opaque colors, high viscosity, superior flame retardance.
Lexan 953A Clear, tints and opaque colors, high viscosity, flame retardant with exceptional surface.
Lexan 121 Nonhalogenated. 17.5 MFR, for small intricate parts.
Lexan 121R Nonhalogenated. 17.5 MFR, for small, intricate parts.
Lexan 123 Nonhalogenated. 17.5 MFR, for small, intricate parts.
Lexan 123R Nonhalogenated. 17.5 MFR, for small, intricate parts.
Lexan 141 Nonhalogenated. 10.5 MFR.
Lexan 141R Nonhalogenated. 10.5 MFR.
Lexan 143 Nonhalogenated. 10.5 MFR.
Lexan 143R Nonhalogenated. 10.5 MFR.
Lexan 201R 7.0 MFR, for thicker sections without sinks. Improved flame retardance.
Lexan 203R 7.0 MFR, for thicker sections without sinks. Improved flame retardance.
Lexan 221R 17.5 MFR, for small, intricate parts.
Lexan 223R 17.5 MFR, for small, intricate parts.
Lexan 241R 10.5 MFR. Improved flame retardance.
Lexan 243R 10.5 MFR. UV-stabilized. Improved flame retardance.
Lexan EM1210 Automotive interiors. Excellent heat/impact resistance and outstanding
Lexan EM2212 Automotive interiors. 10% glass-reinforced.
Lexan EM3110 Automotive interiors. Optimizes flow/processability for cost effective thinner wall design uses.
Lexan EM3110R Automotive interiors. Optimizes flow/processability for cost effective thinner wall design uses.
Lexan HF1110 General purpose grade. Good clarity, heat resistance, property retention and dimensional stability.
Lexan HF1110R High flow grade. Easy mold release version of LEXAN HF1110.
Lexan HF1130 UV-stabilized. Good clarity, heat resistance, property retention and dimensional stability.
Lexan LI1813R Low-viscosity multi-purpose PC having low levels of ionics species.
Lexan LI1911R Low-viscosity multi-purpose PC having low levels of ionics species.
Lexan ML3729 PC, Mold Release, UV-Stabilizer, Heat Stabilized,
Lexan 3412HF 20% glass reinforced, high flow PC. UL rated V-1 at 0.059",
Lexan 3412R 20% GR, provides improved mechanical properties and UL94 V-1 rated at 0.058'.
Lexan 3413HF 30% glass reinforced, high flow PC.
Lexan 3413R 30% GR, provides improved mechanical properties and UL94V-1 rated at 0.058".
Lexan 3414R 40% GR, provides improved mechanical properties and UL94V-1 rated at 0.058".
Lexan 3433R 30% GR, provides improved mechanical properties. UV-stabilized. Internal mold release.
Lexan 500 10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance.
Lexan 500R 10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance.
Lexan 503 10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance.
Lexan 503R 10% GR PC. Optimum combination of high modulus plus excellent impact strength and flame retardance.
Lexan 4251R PPC+EXL, Mold Release, Heat Stabilized, High Impact, Opaque.
Lexan 4301 PPC+PC, Mold Release, Opaque,
Lexan 4401R PC/PPC Blend. Contains mold release.
Lexan 4501 High heat resistant polyphthlate carbonate, provides DTUL of 290F at 264 psi.
Lexan 4701R High heat resistant polyphthlate carbonate, provides DTUL of 300F at 264 psi.
Lexan 124 17.5 MFR, for small, intricate parts. FDA food contact compliant in limited colors.
Lexan 124R 17.5 MFR, for small, intricate parts. UL rated HB. 200 series recommended when V-2 rating required.
Lexan 144 10.5 MFR. FDA food contact compliant in limited colors.
Lexan 144R MFR 10.5. Internal mold release. FDA food contact compliant in limited colors.
Lexan 4504 High heat resistant PC copolymer, WITH DTUL OF 290F AT 264 psi.
Lexan 4704 High heat polycarbonate copolymer, with DTUL of 300F at 264 psi.
Lexan HF1140 Ideal for disposables/short life cycles.
Lexan HF1140R High flow grade. Heat stabilized. Enhanced level of mold release.
Lexan OQ4120R Optical grade with UV cut-off up to 400 nm, greater optical purity than standard grades.
Lexan OQ4320R Optical grade with UV cut-off up to 400 nm; greater optical purity than standard grades.
Lexan OQ4620R Optical grade with UV cut-off up to 400 nm, greater optical purity than standard grades.
Lexan OQ2720 Ophthalmic/safety lens market. OQ2xxx series in all transparent tints.
Lexan 3412ECR Lexan* 3412ECR Polycarbonate (PC) resin is a 20% glass fiber filled
Lexan 500ECR Lexan* 500ECR Polycarbonate (PC) resin is a 10% glass fiber filled, injection moldable grade.
Lexan 505R Polycarbonate (PC) resin is a 10% glass fiber filled
Lexan 915R Polycarbonate (PC) resin is a non-filled, injection moldable grade featuring non-chlorinated,
Lexan 925 Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan 925A Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan 925AU Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan 925U Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan 945 Polycarbonate (PC) resin is a non-filled, injection moldable grade.
Lexan 945A Polycarbonate (PC) resin is a non-filled, injection moldable grade.
Lexan 945ASR Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated,
Lexan 945AU Polycarbonate (PC) resin is a non-filled, injection moldable grade.
Lexan 945U Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan 955 Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan 955A Polycarbonate (PC) resin is a non-filled, injection moldable grade. This non-chlorinated
Lexan 955AU Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan 955U Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan 9945A Polycarbonate (PC) resin is a non-filled, injection moldable grade of non-chlorinated
Lexan BFL2000 PC, Flame Retardant, Mold Release, Opaque
Lexan BFL2000U Polycarbonat (PC) resin is an injection moldable grade containing non-brominated
Lexan BFL2010 Non-Brominated, Non-Chlorinated Flame retardant PC.
Lexan BFL2015 Non-Brominated, Non-Chlorinated Flame retardant PC.
Lexan BFL4000U Lexan* BFL4000U Polycarbonate resin is an injection grade.
Lexan BPL1000 Polycarbonate (PC) resin is an injection moldable grade of non-chlorinated
Lexan LS1 Automotive lens applications. Low viscosity.
Lexan LS2 Automotive lens applications. Medium viscosity.
Lexan LS3 Automotive lens applications. Medium-high viscosity.
我公司長期經營SABIC LEXAN系列PC，可提供SGS、ROHS、UL黃卡、MSDS、FDA、COC、PDF物性表等各項數據，多年誠信為本，貨源穩定、現貨庫存、質量保證、原廠原包、假一賠十、歡迎來電洽談！
以上是SABIC LEXAN系列PC的詳細信息，由蘇州新塑語塑膠原料有限公司提供，如果您對SABIC LEXAN系列PC的信息有什么疑問，請與我們公司進行進一步聯系，獲取SABIC LEXAN系列PC的更多信息。
在線咨詢 
