|
8407-H13焊絲
|
特 性
|
焊金耐熱 耐腐蝕 耐磨耗性能優良,用于修復基體合金相似的高溫加工工具,如H13鋼.
硬度HRC 43～46度A hot work tool steel that is tungsten free,Good hot hardness up to 565℃.For repair of H-13 tool steels and appications in the die casting and forging industries subject to high thermal gradients.
|
|
用 途
|
焊補有色金屬壓鑄模具 PA POM PS PE EP Weld-repair non-ferrous metal die-casting molds PA POM PS PE EP
|
|
規 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠ 2.4￠
|
MS-3(時效鋼)焊絲
|
特 性
|
馬氏體時效鋼,其堆焊層硬度可達HRC30～32度,溶敷金屬柔軟,具韌性易切削,在其500℃/2H時效處理后硬度可提高到HRC48～50度. Limitation of martensite steel, the hardfacing layer of hardness HRC30 ~ 32 degrees, soluble metal soft, apply, in its toughness cutting 500 ° c / 2H aging treatment can improve HRC48 hardness to 50 ~.
|
|
用 途
|
焊補鋁壓鑄模具,擠壓模具,沖裁模 注塑模等. Weld repairs, aluminum casting die, extrusion dies, punching mould injection mold, etc
|
|
規 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠
|
MS-2(高速鋼)焊絲
|
特 性
|
含有W Mo Cr V 的高合金焊絲,溶敷金屬具有高韌性,高硬度沖擊耐磨耗性能,可使用在600℃的熱間環境,焊后金屬可高達HRC61～63度,經熱處理后硬度尚有提高. Contains W Mo Cr V high alloy welding wire, soluble deposited metal with high toughness and high hardness, impact abrasion resistance performance can be used in 600 degrees Celsius between thermal environment, after welding metal can be as high as HRC61 ~ 63 degree of hardness, still improve.
|
|
用 途
|
焊補冷熱作模具,成型刀具,修整刀具 沖頭 模具 粉碎機刃口,沖壓模具,也可以在碳鋼和低合金鋼上堆焊制成新工具. Heat for mould weld-repair, molding tool, die cutter punch grinder blade, stamping, also can be in the carbon steel and the low alloy steel made on new tools. #
|
|
規 格
|
1.0￠ 1.2￠ 1.6￠ 2.0￠
|
CUS(氬焊銅)
|
特 性
|
氬弧焊銅 優異的機械加工性能 硬度HB-200. Argon arc welding copper excellent machining performance hardness HB - 200.
|
|
用 途
|
廣泛用于電解片 銅合金 鋼 青銅 生鐵銅件之焊補. Widely used in electrolytic copper alloy steel cast bronze pieces of copper pieces of weld-repair.
|
|
規 格
|
0.9￠ 1.2￠ 1.6￠ 2.0￠
|
P20Ni焊絲
|
特 性
|
以焊接開裂敏感性低的合金成份設計,含鎳約1%機械加工性能與蝕刻性優越,焊后硬度
HRC30~34. n cracking sensitivity low alloy welding components design, containing nickel about 1% of machining performance and etching of superior, postweld hardness
HRC30 ~ 34.
|
|
用 途
|
塑膠模具的焊補. Plastic mould weld-repair.
|
|
規 格
|
0.9￠ 1.2￠ 1.6￠ 2.0￠
|
|
在線咨詢 
