EP511-X30-美國Omega原裝詳細介紹
EP511-X30
堅固耐用型電動氣動轉換器
I/P和E/P型號
IP510, EP510, IP511, EP511 Series
2年保修 CE
堅固耐用型電動氣動轉換器
I/P和E/P型號
IP510, EP510, IP511, EP511 Series:堅固耐用型電動氣動轉換器<br>I/P和E/P型號
IP511-X27
Hazardous Locations and Intrinsically Safe Ratings
NEMA 4X (IP65)
0.1% Accuracy Typical
Closed Loop Pressure Feedback Control
Built-in Volume Booster Provides Flow Up to 12 SCFM
Easy Access to Zero and Span
Damping Pot Prevents Overshoot and Hunting
Low Air Consumption
Mount at Any Angle
Compact and Lightweight
Virtually No Sensitivity to Supply Pressure Changes
Removable Orifice for Easy Maintenance
Buna-N Seals Standard, Fluorocarbon Optional
The IP510/EP510 Series are a patented family of electro-pneumatic instruments that are used to reduce a pneumatic supply pressure to a regulated output pressure which is directly proportional to a two-wire current or three-wire voltage input. This design incorporates closed loop sensing of the output pressure to achieve excellent accuracy and vibration stability. They also feature a unique damping circuit which can be adjusted to prevent overshoot and actuator hunting. Model selection includes General purpose NEMA 1, and Water-tight/Corrosion Resistant NEMA 4X (IP65). All models carry Hazardous Locations and intrinsically safe ratings.
SPECIFICATIONS
Accuracy:
Typical: ±0.1% of output span
Max: ±0.25% of output span
Hysteresis:
Typical: ±0.01% of output span
Max: ±0.10% of output span
Deadband: No effect
Repeatability:
Typical: ±0.01% of output span
Max: ±0.10% of output span
Ambient Temperature Effect Zero:
Typical: ±0.004% of nominal span/°F
Max: ±0.022% of nominal span/°F
Ambient Temperature Effect Span:
Typical: 0.013% of calibrated span/°F
Max: 0.022% of calibrated span/°F
Temperature Effect: ≤0.02%/°F, zero and span effects combined
Operating Temperature Range:
Buna-N Elastomers: -29 to 71°C (-20 to 160°F)
Fluorocarbon Elastomers: -18 to 71°C (0 to 160°F)
Storage Temperature Range:
Buna-N Elastomers: -40 to 93°C (-40 to 200°F)
Fluorocarbon Elastomers: -26 to 93°C (-15 to 200°F)
Vibration Effects: Less than 0.5% of span per 1 g, 5 to 2000 Hz, 3 g max, 3 axes
Mounting Position Effect: Not measurable
Loop Load, I/P Transducer:
Less than 10 Vdc drop at 20 mA
Less than 12 Vdc drop at 50 mA
Supply Voltage, E/P Transducer:
Intrinsically Safe/Non-Incendive: 9 to 28 Vdc, less than 20 mA
General Purpose: 9 to 40 Vdc, less than 20 mA
Supply Voltage Effect: No effect
Signal Impedance E/P Transducer: 6000 Ω minimum
RFI/EMI Effect NEMA 4X (IP66): Less than 0.25% of span change in output 10 V/meter, 20 to 1000 MHz (Reference SAMA PML 33.1 to 1978, 2 to abc)
Supply Pressure Sensitivity: No effect
Effective Air Consumption: 0.07 SCFM (2 LPM) maximum
Supply Pressure: 100 psig (6.9 bar) maximum*
* For models with zero output capability maximum supply pressure = 40 psi (2.8 bar) above maximum output, except for 0 to 100 and 0 to 120 psi models that have a maximum supply pressure of 130 psi (9 bar) and 140 psi (9.7 bar) respectively.
Dimensions
IP510: 102 H x 48 W x 89 mm D (4.01 x 1.88 x 3.5")
IP511: 144 H x 112 mm W (5.66 x 4.36")
Port Sizes:
Pneumatic: ? FNPT
Electrical: ? FNPT
產品型號/產品描述
IP510 Models with NEMA 1 (IP00) Enclosure, 4 to 20 mA input
IP510-X15 Current to pressure converter with 3-15 psi output, 4-20 mA input and NEMA-1 enclosure
IP510-X27 Current to pressure converter with 3-27 psi output, 4-20 mA input and NEMA-1 enclosure
IP510-X30 Current to pressure converter with 6-30 psi output, 4-20 mA input and NEMA-1 enclosure
IP510-060 Current to pressure converter with 0-60 psi output, 4-20 mA input and NEMA-1 enclosure
IP510-0120 Current to pressure converter with 0-120 psi output, 4-20 mA input and NEMA-1 enclosure
EP510 Models with NEMA 1 (IP00) Enclosure, 1 to 5 V input
EP510-X15 Voltage to pressure converter with 3-15 psi output, 1-5 volt input and NEMA-1 enclosure
EP510-X27 Voltage to pressure converter with 3-27 psi output, 1-5 volt input and NEMA-1 enclosure
EP510-X30 Voltage to pressure converter with 6-30 psi output, 1-5 volt input and NEMA-1 enclosure
EP510-060 Voltage to pressure converter with 0-60 psi output, 1-5 volt input and NEMA-1 enclosure
EP510-0120 Voltage to pressure converter with 0-120 psi output, 1-5 volt input and NEMA-1 enclosure
IP511 Models with NEMA 4X (IP66) Enclosure, 4 to 20 mA input
IP511-X15 Current to pressure converter with 3-15 psi output, 4-20 mA input and NEMA-4X enclosure
IP511-X27 Current to pressure converter with 3-27 psi output, 4-20 mA input and NEMA-4X enclosure
IP511-X30 Current to pressure converter with 6-30 psi output, 4-20 mA input and NEMA-4X enclosure
IP511-060 Current to pressure converter with 0-60 psi output, 4-20 mA input and NEMA-4X enclosure
IP511-0120 Current to pressure converter with 0-120 psi output, 4-20 mA input and NEMA-4X enclosure
EP511 Models with NEMA 4X (IP66) Enclosure, 1 to 5 V input
EP511-X15 Voltage to pressure converter with 3-15 psi output, 1-5 volt input and NEMA-4X enclosure
EP511-X27 Voltage to pressure converter with 3-27 psi output, 1-5 volt input and NEMA-4X enclosure
EP511-X30 Voltage to pressure converter with 6-30 psi output, 1-5 volt input and NEMA-4X enclosure
EP511-060 Voltage to pressure converter with 0-60 psi output, 1-5 volt input and NEMA-4X enclosure
EP511-0120 Voltage to pressure converter with 0-120 psi output, 1-5 volt input and NEMA-4X enclosure
產品型號說明
(1) (2) (3)
-
選項描述
(1) Enclosure Type
選擇
IP510 代表 NEMA 1 (IP00) Enclosure with 4 to 20 mA input
IP511 代表 NEMA 4X (IP66) Enclosure with 4 to 20 mA input
EP510 代表 NEMA 1 (IP00) Enclosure with 1 to 5 Vdc input
EP511 代表 NEMA 4X (IP66) Enclosure with 1 to 5 Vdc input
(2) Specify Output Range
選擇
X15 代表 3 to 15 psig
X27 代表 3 to 27 psig
X30 代表 6 to 30 psig
060 代表 0 to 60 psig
0120 代表 0 to 120 psig
(3) Seal Material
選擇
Nothing(leave field blank) 代表 Buna-N seals (standard)
-F 代表 Fluorocarbon seals
EP511-X30
EP511-X30-美國Omega原裝 相關產品
EP511-X30-美國Omega原裝 技術文章
在線咨詢 
