DOTX441-美國原裝詳細介紹
DOTX441
溶解氧測量儀器 ? 臺式溶解氧儀表 ? DOTX441
溶解氧變送器、分析儀和控制器
DOTX441
Analyzer/Transmitter/Controller
NEMA 7X (IP68) Enclosure
Galvanic Cell for PPB
Self-Guided Menu
Automatic Calibration and Check
ON/OFF/PWM Control
Programmable Transmitter Output
RS485 Output, in MODBUS?
產品描述
The DOTX441 dissolved oxygen analyzer is supplied in a compact cast aluminum case. SAE 323, with low oxidation grade, anticorrosion treatment and finished with electrostatic epoxy paint. The DOTX441 is compact, light weight, rugged and IP-68 rated. The units include local display, transmitter output and controller function all programmed via a 3-button side panel with an easy self guided menu. The DOTX441 can be mounted on a 51 mm (2") tube or flat surface. Electrical connections are on the terminal bar located in the back housing of the instrument with cable entrance through two cable compression fittings of 13 mm (?") BSP. Common applications include food and drink, pulp and paper, chemical, sanitation, water and wastewater treatments.
SPECIFICATIONS
Case Cast: Aluminum SAE 323
Finishing: Electrostatic epoxy paint
Electrical Connection Connector Bar: Conexell type
Cable Inlet Cable Knockout: 13 mm (?") (2 x)
Assembly: 51 mm (2") tube or flat surface
Identification: SS tag
Enclosure: NEMA 7X (IP68)
Power Consumption: 3.5 VA
Weight: 1.9 kg (4.3 lb)
Electrical Power: 90 to 240 Vac (50/60 Hz)
Working Temperature: 5 to 40°C (41 to 104°F)
Relative Humidity: 20 to 80%
Analyzer/Transmitter
Display Alphanumeric: 2 lines x 16 characters
Range: 0 to 60 mg O2/L
Resolution: 0.1 or 0.01
Relative Precision: 0.02% (full scale)
Working Temperature: 50°C (122°F)
Auto Temperature Compensation: 50°C (122°F)
Measuring Principle: Clark polarographic cell
Response Time: 20 s (programmable)
Barometric Pressure Compensation: Up to 10.000 m
Signal Output Analogic: 4 to 20 mA with programmable output range for all reading range
Galvanic Isolation: 2000 Vac (by opto coupler)
Line Resistance: 1 kΩ
Controller
Actuation Type Frequency: Modulation, P+D
Set-Points: 2 independent from 0 to 100% of scale
Outputs: 2 control ON/OFF, programmable for alarm or actuation P+D
Control for Automatic Cleaning: Timer ON/OFF, for periods up to 99 seconds, and in intervals up to 99 hours
Cell
Type: Immersion
Body material: polypropylene (PP) or 316 SS
Maximum Temperature: (@ 1 ATM) 50°C (122°F)
Body Length: 1.5 m (59"), standard
Auto Cleaning System: Activated by a solenoid valve
注: Comes complete with 304 SS clamps with nuts and bolts for mounting, and operator’s manual.
產品編號 產品描述
DOTX441 Dissolved oxygen analyzer, transmitter and controller (sensor sold separately)
DOE-441 Dissolved oxygen sensor in a polypropylene body
DOE-441-S Dissolved oxygen sensor in a stainless steel body
DOE-441-R Replacement dissolved oxygen sensor for DOE-441 cell
DOM-441 Replacement cell maintenance kit
DOA-21RS Sensor refill solution
DOTX441
DOTX441-美國原裝 相關產品
DOTX441-美國原裝 技術文章
在線咨詢 
