|
1 Scope
1.1 These requirements cover adhesive-attached labels for use as permanent nameplates or markers; bearing information, instructions, or identification in the form of text or pictographs. The adhesive may be pressure-sensitive, heat-activated, or solvent-activated. These labels are intended to be used by manufacturers for application to their products at their place of manufacture.
1.2 These requirements also cover:
a) Unprinted materials used by label converters to produce finished labels, such as blank label stocks, overlaminations, laminating adhesives and screen-printable adhesives;
b) Specific combinations of label material, ink, and printing process evaluated as a system; and
c) Labels that are intended to be mechanically affixed or molded into a plastic part.
1.3 These requirements apply to marking and labeling systems used on complete devices, appliances, or equipment. The acceptability of a label system/material in a particular application is to be judged under the applicable requirements in the standard covering the device, appliance, or equipment on which the label system/material is used.
1.4 Marking and labeling systems are evaluated for specific uses and for application to specific surface materials that are essentially smooth, flat, and rigid unless another surface configuration is specified by the manufacturer.UL標簽系統(Labeling system)介紹及相關要求:
PGDQ2: Marking and Labeling System (標示及標簽系統)
已經表面處理, 印刷過之標簽, 至少包括面材, 粘膠及印刷, 也有可能包含上光膜及/或面材的組合。
生產產品廠商 (applicant) 向 標簽供貨商 (label supplier) 購買無須加印的標簽時, 生產廠商于廠驗時應提供 PGDQ2 的相關文件予廠驗人員檢驗。 此文件應由 標簽供貨商 提供給 生產廠商。
PGJI2: Printing Materials (印刷材料)
經印刷或未經印刷之面材及油墨的組合, 以雷射或熱轉印的方式印刷, 使用者可自行加印。
生產廠商 向 標簽供貨商 購買文字可由生產廠商自行加印的標簽時, 生產廠商于廠驗時應提供 PGJI2 的相關文件予廠驗人員檢驗。 此文件應由 標簽供貨商 提供給 生產廠商。
生產廠商 可加印的任何訊息 如 UL Listing mark, file number, model name, 條形碼 (bar codes ) 等等。
PGGU2: Marking and Labeling System Materials (標示及標簽系統材料)
標簽之組合包括未經印刷之面材及粘膠或上光膜。主要針對粘膠作測試。
PGIS2: Marking and Labeling Systems, Limited Use (標示及標簽系統, 限制使用)
可彎曲電線上之標簽, UL588/817使用。
與吊掛標簽的測試相似，加上了拉力測試等等。
PGAA: Authorized Label Suppliers Program.
標簽供貨商欲印制含有UL listing Mark 的標簽提供給生產廠商時， 于 2003/3/31 起, 標簽供貨商 應額外提供 PGAA 的相關文件予生產廠商， 以便廠驗人員檢驗。
詳詢sunny 陶13913142465 QQ1822971259
|
在線咨詢 
