印刷有機廢氣蓄熱式焚燒爐(RTO)裝置 |
![]() |
價格:0 元(人民幣) | 產地:上海 |
最少起訂量:1套 | 發貨地:上海 | |
上架時間:2018-04-23 14:34:40 | 瀏覽量:342 | |
上海安居樂環?萍脊煞萦邢薰
![]() |
||
經營模式:生產加工 | 公司類型:股份有限公司 | |
所屬行業:其他環保分類 | 主要客戶:工廠 | |
![]() ![]() |
聯系人:熊經理 (小姐) | 手機:13816803170 |
電話: |
傳真: |
郵箱:xiongli@anjule.com | 地址:上海市奉賢區青偉路188號 |
印刷廠印刷油墨產生的氣味跟廢氣可以通過引風機抽出,經專業過濾器凈化處理后,廢氣中細小粉塵、未凝固的油墨異味及少量的有機廢氣顆粒被過濾攔截,確保廢氣中粉塵顆粒物大部份被攔截去除,廢氣再進入預處理后,進入紫外光冷燃燒除臭設備內,經高能紫外線光束裂解/臭氧氧化處理后,最終通過管道達標排放到大氣中。印刷時一般都會使用含苯的稀釋劑,刺激性氣味較大,在使用時容易污染空氣,所以在作業時最好戴上口罩,工作完后最好洗臉及沖洗雙手,對于含鉛的物質需長期接觸者請多喝鮮奶,牛奶可解輕微鉛中毒。
有機廢氣蓄熱式焚燒爐(RTO)裝置,是我公司總結多年廢氣治理經驗,在直接燃燒裝置技術基礎上優化改進所開發的成果之一,其處理效果達到國家相關標準要求,并高效節能、且無二次污染的新型系列產品。經眾多用戶使用和專家鑒定,已達到國內同類產品的優秀水平。 蓄熱式焚燒爐(RTO)裝置廢氣處理裝置特點
(1)工藝技術先進,各項技術指標在同行業中屬優秀地位;
(2)采用高效、結構合理的傳質設備和可靠的材質; (3)操作靈活,彈性大,適應廢氣風量及有機物負荷波動能力強; (4)操作、維護方便,設備啟動快,根據有機廢氣濃度高低,僅需15~30分鐘升溫至反應溫度; (5)采用計算機(PLC)對裝置進行自動控制,影響到處理質量、安全、吸收效果等過程關鍵參數,均由計算機自動控制,自動化程度高; (6)不影響主體裝置的正常運行; (7)安全可靠,設備配有自動泄壓、超溫報警及先進的自控系統; (8)設計高效的換熱流程,余熱得到充分回用,降低運行成本; (9)沒有二次污染。 蓄熱式焚燒爐(RTO)裝置實用范圍 本裝置主要用于石化、機械、、冶金、機電、印刷、、涂裝、家電以及制鞋行業車間里揮發或泄漏出的有害有機廢氣的凈化及臭味的消除,實用與濃度較高,含有雜質,用其他技術處理有一定難度的各種風量的廢氣時采用。
印刷有機廢氣蓄熱式焚燒爐(RTO)裝置反應原理 直接燃燒裝置是利用輔助燃料,在特定的環境(燃燒爐內)中,燃燒發熱建立反應環境,含有機物的廢氣直接送入,在高溫下,廢氣中的有機物與空氣中的氧發生化學反應,有機物被氧化分解為CO2和H2O,同時放出熱能,從而達到去除廢氣中的有害物 從上式可以看出,該反應是放熱反應,氧化時的高溫氣體的熱量被蓄熱體“貯存”起來,用于預熱新進入的有機廢氣,從而節省升溫所需要的燃料消耗,降低運行成本。 待處理有機廢氣經引風機進入蓄熱室1的蓄熱層( “貯存”上一循環的熱量),蓄熱層釋放熱量,溫度降低,而有機廢氣吸收熱量,溫度升高,廢氣離開蓄熱室后以較高的溫度進入氧化室,此時廢氣溫度的高低取決于蓄熱層體積、廢氣流速和蓄熱層的幾何結構。 在氧化室中,有機廢氣再由燃燒器補燃,加熱升溫至設定的氧化溫度。使其中的有機物被分解成二氧化碳和水。由于廢氣已在蓄熱室內預熱,燃燒器的燃料用量大為減少。氧化室有兩個作用:一是保證廢氣能達到設定的氧化溫度,二是保證有足夠的停留時間使廢氣中的廢氣充分氧化。 廢氣流經蓄熱室A升溫后進入氧化室焚燒,成為凈化的高溫氣體后離開氧化室,進入蓄熱室B(在前面的循環中已被冷卻),釋放熱量,降溫后排出,而蓄熱室B吸收大量熱量后升溫(用于下一個循環加熱廢氣)。處理后氣體離開蓄熱室B,經引風機排入大氣。
安居樂VOC沸石轉輪濃縮GRTO裝置簡介: Zeolite Rotary Concentrator Wheel+ GRTO:
How to treat low concentration with large air flow waste stream? Shanghai Anjule has patent designed solutions with the zeolite concentrators to reduce the air flow of the pollutant and concentrate the VOCs before the RTO treatment. Improve the removal efficiency, reduce the operating cost while meeting the regulations. This is a leading technologies in treating VOCs and HAP.
The process flow for zeolite rotary concentrator wheel+ RTO (RCO)
Anjule technology can be applied to work with the process specifications. For example, emission from coating industrial has the characteristic of high air volume: the waste gas was sent to the G-vortex column to remove particulate. After the dehumidifier process, the waste gas was sent to a specially designed filter before entering the rotary concentrator for VOCs adsorption. The removal efficiency can achieve VOC removal efficiency above 90%. A system fan was installed to release the cleaned air, which is in compliance with the regulations. The air stream then transfer to the RTO for further treatment.
1. Rotary entrance with G-vortex column Anjule G-vortex column has a unique vortex structure, purify and remove the paint organic substance from gas. The advantage: 1. Avoid the blockage of the packing media; reduce the operating cost; and achieve high removal efficiency of VOC substance. Minimize the accumulation of the paint substance on the rotary and at a result prevent fire hazard.
2. Advance rotary device
Aujule has set up a laboratory and an engineering center for the design of the exhaust gas VOC treatment. The rotary wheels are imported from Japan; the VOC compounds removal rate are measured in a laboratory to ensure the successful treatment for the environmental projects. The advantage of our rotary concentrator: small size, convenience, low pressure lost and work continuously to concentrate low VOC concentration waste gas. The rotary processed gas has a high concentration of VOC with less volume and therefore reduce the amount of the waste gas for the RTO treatment.
3. Safety guarantee Patent designed of Anjule GRTO has put the fire, explosions and other safety factors into fully consideration. The operation of the GRTO is steady, safe and reliable.
4. Advance Technology GRTO control system equipped with software and hardware interlocks, through temperature, pressure responses, the system reacts immediately to the safety control of the system. Effectively,protect the safety of the system . RTO control system uses PLC, installed inside of the control panels; equipped with flame intensity detector, temperature controllers, alarm, reset, on and off switch, emergency stop, and a recorder; RTO system works seamlessly with the production line without interfering to the existing production.
5. The low operating cost advantage Lower operating cost can be achieved with high VOC concentration in the waste stream. Using a rotary concentrator to reduce the volume of the waste gas is a feasible way in decreasing the cost.
安居樂印刷車間廢氣治理部分成功案例:
世界五百強艾利(蘇州)公司除印刷車間氣味
全國最大聚烯烴薄膜廠浙江眾成包裝印刷廠廢氣治理
韓國世一電子(威海)印刷線路板車間除異味
著名品牌五糧液酒廠包裝印刷廢氣處理
|
版權聲明:以上所展示的信息由會員自行提供,內容的真實性、準確性和合法性由發布會員負責。機電之家對此不承擔任何責任。 友情提醒:為規避購買風險,建議您在購買相關產品前務必確認供應商資質及產品質量。 |