SGS 燃燒實驗室, 針對各類電線電纜, 電子電工產品以及國內外標準和行業要求, 為企業提供專業公正的第三方阻燃測試報告.
以下是實驗室標準參考, 如需進一步資訊, 請聯系SGS Charlotte
UL1581:2011 Reference standard fo electrical wires cables,and flexible cords
|
Test Clause
|
Requirement
|
Flame Test
|
Clause 1060
|
Vertical Flame and FT1 Tests
|
Clause 1061
|
Cable Flame Test
|
Clause 1080
|
VW-1 (Vertical-Specimen) Flame Test
|
Clause 1090
|
Horizontal-Specimen Appliance-Wire Flame Test
|
Clause 1100
|
Horizontal-Specimen / FT2 Flame Test
|
Sample Required:
|
2 m
|
UL2556:2007 Wire and Cable Test Methods
|
Test Clause
|
Requirement
|
conditioning
|
No designation
|
Clause 9 Burning characteristics tests
|
Clause 9.1
|
FT2/FH/Horizontal flame
|
Clause 9.2
|
Burning particles (dropping)
|
Clause 9.3
|
FT1
|
Clause 9.4
|
FV-2/VW-1
|
Clause 9.5
|
FV-1/Vertical flame
|
Clause 9.6
|
Vertical tray flame tests (Method 1 – Vertical tray and Method 2 – FT4)
|
Clause 9.7
|
ST1 limited smoke
|
Clause 9.8
|
Fire propagation/RPI
|
Clause 9.9
|
Smoke emission
|
Clause 9.10
|
Halogen acid gas emission
|
Clause 9.11
|
Acid gas emission
|
Sample Required:
|
4 m
|
IEC 60332-3-24:2009 Tests on electric and optical fibre cables under fire conditions Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category C (Identical With EN 60332-3-24:2009)
|
Test Clause
|
Requirement
|
conditioning
|
conditioned at a temperature of (20 ± 10) °C for at least 16 h before commencing the test.
|
IEC 60332-3-25:2009 Tests on electric and optical fibre cables under fire conditions Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables – Category D (Identical With EN 60332-3-25:2009)
|
Test Clause
|
Requirement
|
conditioning
|
conditioned at a temperature of (20 ± 10) °C for at least 16 h before commencing the test.
|
DIN EN 6059-303 (DRAFT) Aerospace series - Electrical cables, installation; Protection sleeves; Test methods - Part 303: Resistance to fluids
|
ISO 6722:2006 specifies the dimensions, test methods, and requirements for single-core 60 V cables intended for use in road vehicle applications, clause 9.2 Resistance to abrasion
|
GB/ T 17651:1998 電線電纜燃燒煙濃度試驗/ Measurement of smoke density of cables burning under defined condition
|
IEC 61034:2005 Measurement of smoke density of cables burning under defined conditions 電纜煙密度 (Identical With EN 61034:2005)
|
IEC 60754-1 :1994 (GB 17650.1) Test on gases evolved during combustion of materials from cables
|
BS EN 50267-2-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables Part 2-1: Procedures - Determination of
the amount of halogen acid gas
|
IEC 60754-2:1991 (AMD 1997) (GB 17650.2) Test on gases evolved during combustion of materials from cables
|
BS EN 50267-2-2:1999 Common test methods for cables under fire conditions -Tests on gases evolved during combustion of materials from cables Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity
|
BS EN 50267-2-3:1999 Common test methods for cables under fire conditions -Tests on gases evolved during combustion of materials from cables Part 2-3: Procedures - Determination of
degree of acidity of gases for cables by determination of the weighted average of pH and conductivity
|
GB/T 12666.1-2008 單根電線電纜燃燒試驗方法 第1部分 垂直法/ Test method on a single wire or cable under fire conditions- Part 1: Vertical specimen flame test
|
GB/T 12666.2-2008 單根電線電纜燃燒試驗方法 第2部分 水平燃燒試驗法/ Test method on a single wire or cable under fire conditions- Part 2: Horizontal specimen flame test
|
GB/T 12666.3-2008 單根電線電纜燃燒試驗方法 第3部分 傾斜燃燒試驗/Test method on a single wire or cable under fire conditions- Part 3 slanting specimen flame test
|
IEC 60695-2-11-2000 Fire hazard testing — Part 2-11: Glowing/hot-wire based test methods — Glow-wire flammability test method for end-products 灼熱絲可燃性試驗方法 (GB/T 5169.11)
|
IEC 60695-2-12-2000 Fire hazard testing — Part 2-12: Glowing/hot-wire based test methods — Glow-wire flammability test method for materials (GB/T 5169.12)
|
IEC 60695-2-13-2000 Fire hazard testing — Part 2-13: Glowing/hot-wire based test methods — Glow-wire ignitability test method for meterials (GB/T 5169.13)
|
ASTM D2863-2012 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
|
ISO 4589-2:1996+A1:2005 Plastics -- Determination of burning behaviour by oxygen index -- Part 2: ambient-temperature test
|
ISO 4589-3:1996 Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
|
GB/T 2406.2:2009 塑料 用氧指數法測試燃燒行為 第2部分:室溫實驗 (ISO4589-2:1996+A1:2005)
|
GB/T 10707:2008 橡膠燃燒性能測定/Rubber-Determine of the burning
|
測試A:氧指數/Oxygen index
|
測試B:垂直燃燒/vertical burning
|
GB/T 2408-2008 塑料燃燒性能試驗方法 水平、垂直燃燒法/Plastics-Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source
|
GB/T 8924:2005 纖維增強塑料燃燒性能試驗方法-氧指數/Test method for flammability characteristics of fiber reinforced plastic-Oxygen index method
|
GB/T 16581:1996 絕緣液體燃燒性能試驗方法-氧指數/ Test method for the determination of
ox ygeni ndexo fi nsulatingl iquids
|
IEC 1144-1992 Test method for the determination of oxygen index of insulating liquids 絕緣液體-氧指數
|
JB/T 8988:1999 測定絕緣液體氧指數的試驗方法/ Test method for the determination of oxygen index of insulating liquid
|
UL 94:2011 Test For Flammability of Plastic Materials for Parts in Devices and Appliances
|
BS EN 50305:2002 Railway applications — Railway rolling stock cables having special fire performance —Test methods (Only for clause 9: Reaction to fire)
|
IEC 60695-11-10:2003 Fire hazard testing – Part 11-10: Test flames – 50 W horizontal and vertical flame test methods 50 W水平垂直燃燒測試
|
UL 224:2010 Extruded Insulating Tubing (Only clause 5.10 Flame Test – All Tubing and clause 5.11 Optional VW-1 (Vertical Wire) Flame Test)
|
IEC 60331-21:1999 Tests for electric cables under fire conditions – Circuit integrity – Part 21: Procedures and requirements – Cables of rated voltage up to and including 0,6/1,0 Kv (GB/T 19216.21)
|
IEC 60331-23:1999 Tests for electric cables under fire conditions – Circuit integrity – Part 23: Procedures and requirements – Electric data cables (GB/T 19216.23)
|
GB/T 19216.31:2008 在火焰條件下電纜或光纜的線路完整性試驗第31部分 供火并施加沖擊的試驗程序和要求 額定電壓0.61kV及以下電纜
|
IEC 60331-1:2009 Tests for electric cables under fire conditions – Circuit integrity – Part 1: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
|
IEC 60331-2:2009 Tests for electric cables under fire conditions – Circuit integrity – Part 2: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20 mm
|
IEC 60331-3:2009 Tests for electric cables under fire conditions – Circuit integrity – Part 3: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
|
BS 6387:1994 Specification for Performance requirements for cables required to maintain circuit integrity under fire conditions
|
GB/T 18380.12-2008 電纜或光纜在火焰條件下的燃燒試驗 第12部分:?jiǎn)胃^緣電線電纜火焰垂直蔓延試驗 1KW預混合型火焰試驗方法
|
GB/T 18380.13-2008 電纜或光纜在火焰條件下的燃燒試驗 第13部分:?jiǎn)胃^緣電線電纜火焰垂直蔓延試驗 測定燃燒滴落(物)/微粒的試驗方法
|
GB/T 18380.22-2008 電纜和光纜火焰條件下的燃燒試驗 第22部分單根絕緣細電線電纜火焰垂直蔓延試驗 擴散型火焰試驗方法
|
GB/T 18380.32-2008 電纜和光纜火焰條件下的燃燒試驗 第32部分垂直安裝的成束電線電纜火焰垂直蔓延試驗 A F/R 類
|
GB/T 18380.33-2008 電纜和光纜火焰條件下的燃燒試驗 第33部分垂直安裝的成束電線電纜火焰垂直蔓延試驗 A 類
|
GB/T 18380.34-2008 電纜和光纜火焰條件下的燃燒試驗 第34部分垂直安裝的成束電線電纜火焰垂直蔓延試驗 B 類
|
GB/T 18380.35-2008 電纜和光纜火焰條件下的燃燒試驗 第35部分垂直安裝的成束電線電纜火焰垂直蔓延試驗 C 類
|
GB/T 18380.36-2008 電纜和光纜火焰條件下的燃燒試驗 第36部分垂直安裝的成束電線電纜火焰垂直蔓延試驗 D 類
|
GA 306.1:2007 阻燃及耐火電纜 塑料絕緣阻燃及耐火電纜分級及要求 第一部分:阻燃電纜
|
GA 306.2:2007 阻燃及耐火電纜 塑料絕緣阻燃及耐火電纜分級及要求 第二部分:耐火電纜
|
耐火性能
|
耐火級別
|
|
I 級、I A級
|
耐火特性、煙密度,煙氣毒性、耐腐蝕性
|
II級、II A級
|
III級、III A級
|
耐火特性、煙密度,煙氣毒性
|
IV級、IV A級、
|
耐火特性
|
GB/T 19666-2005 阻燃和耐火電線電纜通則
|
第5章 燃燒特性要求
|
Clause 5.1 阻燃特性要求
|
代號
|
Clause 5.1.1 單根阻燃特性
|
Z
|
Clause 5.1.2 成束阻燃特性
|
ZA/ZB/ZC/ZD
|
Clause 5.2 耐火特性要求
|
N
|
Clause 5.3 無鹵特性要求
|
W
|
Clause 5.4 低煙特性要求
|
D
|
GB 4943.1:2011 信息技術設備 安全 第1部分:通用要求 Information technology equipment- safety - Part 1: General requirements 附錄A (規范性附錄) 耐熱和防火試驗
|
A.1 總質量超過18kg的移動式設備和駐立式設備防火防護外殼的可燃性試驗
|
A.2. 總質量不超過18kg 的移動式設備防火防護外殼和安置在防火防護外殼內的材料和元器件的可燃性試驗
|
A.3 灼熱燃油試驗
|
TB/T 1484.1-2010 《機車車輛電纜 第1部分:額定電壓3kV及以下標準壁厚絕緣電纜》
|
第7章 安全性能
|
Clause 7.1 單根電纜燃燒性能
|
GB/T 18380.12
|
Clause 7.2 成束電纜燃燒性能
|
GB/T 18380.35
|
Clause 7.3 電纜燃燒煙密度
|
GB/T 17651
|
Clause 7.4 PH值和電導率
|
GB/T 17650.2
|
Clause 7.5 鹵素含量
|
GB/T 17650.1
|
Clause 7.6 毒性指數
|
EN 50305
|
TB/T 1484.2-2010 《機車車輛電纜 第2部分:薄壁絕緣電纜》
|
第7章 安全性能
|
Clause 7.1 單根電纜燃燒性能
|
GB/T 18380.12
|
Clause 7.2 成束電纜燃燒性能
|
GB/T 18380.35/36
|
Clause 7.3 電纜燃燒煙密度
|
GB/T 17651
|
Clause 7.4 PH值和電導率
|
GB/T 17650.2
|
Clause 7.5 鹵素含量
|
GB/T 17650.1
|
Clause 7.6 毒性指數
|
EN 50305
|
TB/T 1484.3-2010 《機車車輛電纜 第3部分:30kV乙丙橡皮絕緣單相電力電纜》
|
第7章 安全性能
|
Clause 7.4.21 不延燃性
|
GB/T 18380.1
|
Clause 7.4.22 電纜燃燒煙密度
|
GB/T 17651
|
Clause 7.4.22 PH值和電導率
|
GB/T 17650.2
|
TB/T 1484.4-2010 《機車車輛電纜 第4部分:無鹵低煙阻燃通信網絡用電纜》
|
5.12 燃燒特性
|
Clause 5.12.1 單根電纜燃燒
|
GB/T 18380.12
|
Clause 5.12.2 PH值和電導率
|
GB/T 17650.2
|
Clause 5.12.3 電纜燃燒煙密度
|
GB/T 17651
|
Clause 5.12.4 毒性指數
|
EN 50305
|

|