DPiS32詳細介紹
DPiS32
1/32 DIN Models iS32, Strain and Process Meters and Controllers
I-STRAIN
5年保修 新產品! CE
I-STRAIN:1/32 DIN Models iS32, Strain and Process Meters and Controllers
dpis32
高質量
免費保修5年
高精度為0.03%
用戶友好，簡單的配置
免費軟件，Active X控件
The iS series of meter/controllers can measure a wide variety of strain gage bridge and DC voltage intputs for all common load cells, pressure transducers, and most any strain gauge type of transducer. It is the first instrument of its kind, offering a wealth of powerful features and performance in an amazingly compact 1/32 DIN package or a 1/8 DIN package with 0.83" (21mm) high digits. The iS series handles input ranges of 0-100 mV, -100 mVdc to 1 Vdc, 0-10 V and 0-20mA. The iS series is easy to configure and scale to virtually any engineering units using the push buttons on the front panel, or using personal computer with the optional serial communications and free configuration software. The serial communications option includes both RS-232 and RS-485 on one instrument, and the straightforward OMEGA ASCII communications protocol, as well as MODBUS protocol. The iS series includes built-in excitation for transducers, selectable as 10 V at 100 mA or 5 V at 60 mA. The CNiS series controllers feature a choice of two optional outputs: Form C SPDT (single pole double throw) mechanical relays, solid state relays, DC pulse, and programmable analog output selectable for either a control function or retransmission of the process value. The iS series features the iSeries totally programmable color display that can change colors between Green, Amber, and Red at any setpoint or alarm point.
SPECIFICATIONS
Input Ranges: 0-100 mV, -100 mVdc to 1 Vdc, 0-10 V, 0-20 mA
Isolation: 354 V peak per IEC spacing
NMR: 60 dB
CMR: 120 dB
Input Impedance: 10 MOhms for 100 mV input 1 MOhm for 1 or 10 V input 5 Ohms for 20 mA current input
Display: 4 digits, 9 segments tri-color LED
Digit Height: iS32;10.2 mm (.4")
iS8; 21 mm (0.83")
Analog-to-Digital technique: Dual slope
Internal A/D Resolution: 15 bits
Read rate: 3 / sec
Polarity: Automatic
Max Error Strain/Process: ±0.03% rdg.
Span tempco.: ± 50 ppm / C
Step response: 1-2 sec.
Warmup to rated accuracy: 30 min.
Analog Output (optional): 0-10 V, 4-20 mA, can be used as Retransmission or PID Control.
Excitation Voltage: 10 V @ 100 mA, 5 V @ 60 mA
Power: 90-240 Vac 50-400 Hz or 90-375 Vdc, 4 W (optional) 24 Vac 50-400 Hz or 12-36 Vdc, 5 W
Dimensions:iS32: 25.4 H x 48 W x 127 D mm (1.0 x 1.89 x 5.0")
iS8: 48 H x 96 W x 127 D mm (1.89 x 3.78 x 5.0")
Weight:iS32; 127 g (0.28lb)
iS8; 295 g (0.65lb)
Approvals: CE per EN50081-1, EN50082-2, EN61010-1
產品型號 產品描述
DPiS32 1/32 DIN i Series strain gage meter with 90-240 Vac/dc power
DPiS32-C24 1/32 DIN i Series strain gage meter with RS-232 & RS-485 communications and 90-240 Vac/dc power
DPiS32-DC 1/32 DIN i Series strain gage meter with 24 Vac or 12-36 Vdc power
DPiS32-C24-DC 1/32 DIN i Series strain gage meter with RS-232 & RS-485 communications and 24 Vac or 12-36 Vdc power
DPiS8 1/8 DIN i Series strain gage meter with 90-240 Vac/dc power
DPiS8-C24 1/8 DIN i Series strain gage meter with RS-232 & RS-485 communications and 90-240 Vac/dc power
DPiS8-DC 1/8 DIN i Series strain gage meter with 24 Vac or 12-36 Vdc power
DPiS8-C24-DC 1/8 DIN i Series strain gage meter with RS-232 & RS-485 communications and 24 Vac or 12-36 Vdc power
CNiS822 1/8 DIN i Series strain gage controller with two solid state relays and 90-240 Vac/dc power
CNiS822-C24 1/8 DIN i Series strain gage controller with two solid state relays, RS-232 & RS-485 communications and 90-240 Vac/dc power
CNiS3222 1/32 DIN i Series strain gage controller with two solid state relays and 90-240 Vac/dc power
CNiS3222-C24 1/32 DIN i Series strain gage controller with two solid state relays, RS-232 & RS-485 communications and 90-240 Vac/dc power
產品型號說明
(1) (2) (3) (4) (5)
CNIS
選項描述
(1) DIN Cutout
選擇
32 代表 32nd DIN
8 代表 8th DIN
(2) Control Outputs #1
選擇
2 代表 Solid State Relay/1 A at 120/240 Vac continuous
3 代表 SPDT Relay
4 代表 Pulsed 10 Vdc at 20 mA
5 代表 Analog Output 0 to 10 Vdc
(3) Control Outputs #2
選擇
2 代表 Solid State Relay/1 A at 120/240 Vac continuous
3 代表 Relay SPDT 3A at 120/3 A at 240 Vac
4 代表 Pulsed Driver 10 Vdc at 20 mA /for use with external SSR
(4) Serial Communications
選擇
Nothing(leave field blank) 代表 Standard Unit
-C24 代表 Isolated RS-232 and RS-485 300 to 19.2 k baud
(5) Power Supply
選擇
Nothing(leave field blank) 代表 Standard Power (90 to 240 Vac/dc @ 50 to 400 Hz)
-DC 代表 Low Voltage Power (24 Vac or 12 to 36 Vdc)
DPiS32
DPiS32 相關產品
DPiS32 技術文章
在線咨詢 
