Specifications for SW-4000TL-PMCL Sweep Series
Scanning system Trilinear CMOS line scan
Active pixels 3 x 4096 pixels (R, G, B) in trilinear configuration
Line rate Up to 65.963 kHz (variable)
Sensor width 30.72 mm
Pixel size 7.5 μm x 7.5 μm
Pixel clock (CL) 31.875 / 42.5 / 63.75 / 85 MHz
Video output Camera Link Base (8 bit - RGB8)
Camera Link Medium (8/10 bit - RGB8, RGB10)
Camera Link Full (8 bit - RGB8)
Camera Link Deca (8 bit - RGB8)
Object illuminance (min.) 22o lx @ 7800 K
(Gain 18 dB, 525 μs exp., 50% video, RGB8)
Responsivity 127 DN/nJ/cm2
(G ch 10-bit @ 550 nm)
S/N ratio 57 dB on green, 10-bit with 0 dB gain
Inputs Trigger (Camera Link, TTL/75Ω via 12-pin or 10-pin)
Outputs LVAL, DVAL, EEN, XEEN (TTL)
Gain Analog Base Gain: 0 dB / 6 dB / 12 dB
Digital Master: 0 to +18 dB, R/B: -7.96 to +12 dB
Digital Individual: 0 to +24 dB
Gamma 0.45 to 1.0 (9 steps) or 257-point LUT
Image processing PRNU/DSNU, black level, shading, tilted view,
spatial compensation, chromatic aberration
Color space conversion RGB to HSI, RGB to XYZ (CIE),
sRGB, Adobe RGB, or User Custom RGB
Exposure modes No shutter, shutter select, and trigger width control
Electronic shutter 3 μs to 15.15 μs in 10 ns increments
at fastest line rate. Exposure time can be
longer at slower line rates.
Pulse width control 3 μs to 2 sec (via Camera Link)
1.8 μs to 2 sec (via 12-pin/10-pin connectors)
Control interface Camera Link
RS-232C
Lens mount M42 mount or Nikon F-mount
Operating temp. (ambient) -5°C to +45°C (20 to 80% non-condensing)
Storage temp. (ambient) -25°C to +60°C (20 to 80% non condensing)
Vibration 10G (20 Hz to 200 Hz, XYZ directions)
Shock 80G
Regulations CE (EN61000-6-2, EN61000-6-3)
FCC Part 15 Class B, RoHS/WEEE
Power 12-pin
PoCL
+12V to +24V DC ± 10%
+10V DC to +13V DC
Power consumption 7.8 W typical @ +12V
Dimensions (H x W x L)
M42 mount
F-mount
(without connector and lens mount protrusion)
62 mm x 62 mm x 71.6 mm
62 mm x 62 mm x 71.8 mm
Weight M42 mount
F-mount
340 g
410 g
Specifications SW-4000TL-PMCL
SW-4000TL-PMCL-F
SW-4000TL-PMCL-M42A
CMOS trilinear RGB camera with F-mount
CMOS trilinear RGB camera with M42 mount
Ordering Information
Dimensions (M42)
Connector pin-out
DC In / Trigger Mini-CL Interface
26
13
14
1
HIROSE HR10A-10R-12PB(71)
Pin 1 Ground
2 DC in +12V to +24V
3 Ground
4 Reserved
5 Opto in 1-
6 Opto in 1+
7 TTL out 4
8 NC
9 TTL out 1
10 TTL in 1
11 DC in +12V to +24 V
12 Ground
Pin Signal Function
1 26 Power
2 15 X0-/X0+ CL Data
3 16 X1-/X1+ CL Data
4 17 X2-/X2+ CL Data
5 18 Xclk-/Xclk+ CL Clk
6 19 X3-/X3+ CL Data
7 20 SerTC+/SerTC- Serial in
8 21 SerTFG-/SerTFG+ Serial out
9 22 CC1-/CC1+ Trigger*
10 23 CC2+/CC2- Reserved
11 24 CC3-/CC3+ Not used
12 25 CC4+/CC4- Not used
13 14 GND
*Via Camera Link or 12-pin/10-pin connectors
Note:
Camera Link Base confguration shown. For
other configurations, refer to Camera Link
specifications or operation manual.
