Specifications for SW-4000TL-10GE Sweep Series
Scanning system Trilinear CMOS line scan
Active pixels 3 x 4096 pixels (R, G, B) in trilinear configuration
Line rate Up to 66.6 kHz (variable)
Sensor width 30.72 mm
Pixel size 7.5 μm x 7.5 μm
Ethernet speeds 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T
Full backwards compatibility
Video output RGB8, RGB10V1Packed, RGB10p32,
YUV422_8_UVYV, YUV422_8
Object illuminance (min.) 22o lx @ 7800 K
(Gain 18 dB, 525 μs exp., 50% video, RGB8)
Responsivity 127 DN/nJ/cm2
(G ch 10-bit @ 550 nm)
S/N ratio 57 dB on green, dark level, 10-bit with 0 dB gain
Inputs Trigger (1 Opto In + 1 TTL via 12-pin, 2 TTL via 10-pin),
Pulse Generator (4), NAND Out (2), Action (4)
Outputs 2 TTL via 12-pin, 2 TTL via 10-pin
Gain Analog Base Gain: 0 dB / 6 dB / 12 dB
Digital Master: 0 to +18 dB, R/B: -7.96 to +12 dB
Digital Individual: 0 to +24 dB
Gamma 0.45 to 1.0 (9 steps) or 257-point LUT
Image processing PRNU/DSNU, black level, shading, tilted view,
spatial compensation, chromatic aberration
Color space conversion RGB to HSI, RGB to XYZ (CIE),
sRGB, Adobe RGB, or User Custom RGB
Exposure modes No shutter, shutter select, and trigger width control
Electronic shutter 3 μs to 15.015 μs in 1 μs increments
at fastest line rate. Exposure time can be
longer at slower line rates.
Pulse width control 3 μs to 2 sec (via Camera Link)
1.8 μs to 2 sec (via 12-pin/10-pin connectors)
Time synchronization Support for Precision Time Protocol (IEEE 1588)
Lens mount M42 mount or Nikon F-mount
Operating temp. (ambient) -5°C to +45°C (20 to 80% non-condensing)
Storage temp. (ambient) -25°C to +60°C (20 to 80% non condensing)
Vibration 10G (20 Hz to 200 Hz, XYZ directions)
Shock 80G
Regulations CE (EN61000-6-2, EN61000-6-3)
FCC Part 15 Class B, RoHS/WEEE
Power 12-pin +10V to +25V DC
Power consumption 9.3 W typical @ +12V
Dimensions (H x W x L)
M42 mount
F-mount
(excluding rear connector protrusion)
62 mm x 62 mm x 106 mm
62 mm x 62 mm x 136.5 mm
Weight M42 mount
F-mount
340 g
410 g
Specifications SW-4000TL-10GE
SW-4000TL-10GE-F
SW-4000TL-10GE-M42A
CMOS trilinear RGB camera with F-mount
CMOS trilinear RGB camera with M42 mount1
Ordering Information
Dimensions (M42)
Connector pin-out
DC In / Trigger GigE Vision Interface
HIROSE HR10A-10R-12PB(71) RJ-45 with locking screws
Pin 1 Ground
2 DC in +12V to +24V
3 Ground
4 Reserved
5 Opto in 1-
6 Opto in 1+
7 TTL out 4
8 NC
9 TTL out 1
10 TTL in 1
11 DC in +12V to +24 V
12 Ground
Spectral response
SW-4000TL-10GE Sensitivity
Wavelength (nm)
Relative Response
Visit our website on www.jai.com
Europe, Middle East & Africa Asia Pacific Americas
Phone +45 4457 8888 Phone +81 45 440 0154 Phone (Toll-Free) 1 800 445 5444
Fax +45 4491 8880 Fax +81 45 440 0166 Phone +1 408 383 0300
Company and product names mentioned in this datasheet are trademarks or registered trademarks of their respective owners.
JAI A-S Cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notice. July 2019
M42 model shown. For F-mount drawings and dimensions, see manual.
1
M42 x 1 with 16 mm flange back distance
Pin Signal
1 TRD+ (0)
2 TRD- (0)
3 TRD+ (1)
4 TRD+ (2)
5 TRD- (2)
6 TRD- (1)
7 TRD+ (3)
8 TRD- (3)
