Specifications for FS-1600D-10GE Fusion Series
Specifications FS-1600D-10GE
FS-1600D-10GE 2-CMOS multi-spectral camera with GigE Vision
Ordering Information
Dimensions
Connector pin-out
DC In / Trigger GigE Vision Interface
HIROSE HR10A-10R-12PB(71)
Pin Signal
1 TRD+ (0)
2 TRD- (0)
3 TRD+ (1)
4 TRD+ (2)
5 TRD- (2)
6 TRD- (1)
7 TRD+ (3)
8 TRD- (3)
Spectral response
Relative response - sensors + prism combined
Wavelength (nm)
Spectral Sensitivity
Visit our website on www.jai.com
Europe, Middle East & Africa Asia Pacific Americas
Phone +45 4457 8888 Phone +81 45 440 0154 Phone (Toll-Free) 1 800 445 5444
Fax +45 4491 8880 Fax +81 45 440 0166 Phone +1 408 383 0300
Company and product names mentioned in this datasheet are trademarks or registered trademarks of their respective owners.
JAI A-S Cannot be held responsible for any technical or typographical errors and reserves the right to make changes to products and documentation without prior notice. November 2019
Outside size tolerance ± 0.3 mm
Sensor 1/2.9” 2-CMOS global shutter (IMX273)
Active pixels 1440 (h) x 1080 (v) x 2 (Bayer / NIR)
Frame rate, full frame 226 frames/sec. @ 8-bit
Active area 4.97 mm (h) x 3.73 mm (v) - 6.21 mm diagonal
Pixel size 3.45 μm x 3.45 μm
System clock 74.25 MHz (for pulse generator)
Read-out modes Full
ROI (single)
ROI (multi)
Binning
1440 (h) x 1080 (v) for each channel
H: 16 to 1440 pixels in 16 pixel steps
V: 8 to 1080 lines in 4 line steps
Up to 4 areas can be defined. No overlap.
1x2, 2x1, 2x2 (NIR only)
EMVA 1288 Parameters
Absolute sensitivity
Maximum SNR
12-bit output format
4.85 p (l = 525 nm), 10.8 p (l = 810 nm)
39.65 dB green, 39.36 dB NIR
Traditional SNR* color
NIR
>60 dB (0 dB gain, 10-bit)
>60 dB (0 dB gain, 10-bit)
Video signal output?
(Two streams)
Visible: BayerRG8, BayerRG10, BayerRG10Packed,
BayerRG12, BayerRG12Packed, RGB8,
RGB10V1Packed, RGB10p32
NIR: Mono8, Mono10, Mono10Packed, Mono12,
Mono12Packed
Video modes Normal, Single ROI, Multi ROI, Sequencer (2 modes)
Gain Manual control - master mode 0 to +24 dB
R/B channels - individually -7 to +15 dB
Auto gain control - off, continuous, one-push
White balance
(Color channel only)
Off, 4 presets (3200K, 5000K, 6500K, 7500K), or
one-push/continuous AWB (3000K to 9000K)
Gamma/LUT 0.45 to 1.0 (9 steps) or 257-point programmable LUT
Shading correction Flat shading, color shading
Trigger input Opto In (2), Pulse Generators (4), Software,
TTL In (2), NAND Out (2), User Output (4)
Exposure modes Timed/EPS, Trigger Width (to ∞), Auto.
Delayed readout option.
Electronic shutter (can be set independently for each channel)
15.26 μs to 8 sec. in 1 μs steps
Auto Level Control (ALC) Shutter range from 100 μs,
gain range from 0 dB to +24 dB.
Tracking speeds and max. values adjustable.
Blemish compensation Up to 200 px/channel
Operating temp. (ambient) -5°C to +45°C (20 to 80% non-condensing)
Storage temp. (ambient) -25°C to +60°C (20 to 80% non condensing)
Vibration 3G (20 Hz to 200 Hz, XYZ directions)
Shock 50G
Regulations CE (EN61000-6-2, EN61000-6-3)
FCC Part 15 Class B, RoHS/WEEE
Power 12-pin +10V to +25V DC. 10.4 W typical @ +12 V
Lens mount C-mount
Dimensions (H x W x L) 62 mm x 62 mm x 86.5 mm (excl. connectors)
Weight 270 g
RJ-45 with locking screws
*Traditional SNR is based on random noise in a single frame, where EMVA SNR measurements
consider more comprehensive noise sources and variance over time. ?12-bit output available in video processing bypass mode. See manual for details.
Pin 1 Ground
2 DC in +10V to +25V
3 Opto In 2-
4 Opto In 2+
5 Opto In 1-
6 Opto In 1+
7 Opto Out 1-
8 Opto Out 1+
9 TTL out 1
10 TTL in 1
11 DC in +10V to +25 V
12 Ground
