Phoenix SH Ni 2 K 100德國(guó)蒂森進(jìn)口焊條
Phoenix SH Ni 2 K 100 Stick electrode, low-alloyed, basic 05/2014 www.voestalpine.com/welding All information provided is based upon careful investigation and intensive research. However, we do not assume any liability for correctness and information is subject to change without notice. Classifications EN ISO 18275-A AWS A5.5 AWS A5.5M E 69 5 Mn2NiCrMo B 4 2 H5 E11018-G (E11018M mod.) E7618-G (E7618M mod.) Characteristics and typical fields of application Basic covered NiCrMo alloyed electrode. Low H2-content ≤ 5 ml/100 g (HD) in the weld metal; very low moisture pickup during long term storage. For high strength fine grained structural steels, for cast steel qualities; weld metal insensitive to cold cracking. Base materials Quenched and tempered fine grained structural steels up to 720 MPa yield point. High strength fine grained structural steels S620QL – S690QL, S620QL1, S690QU, HY 100, Suprafort 700, N-AXTRA 56, 63, 70 Typical analysis of all-weld metal (wt.-%) C Si Mn Cr Mo Ni wt-% 0.06 0.20 1.60 0.38 0.40 1.85 Mechanical properties of all-weld metal Heattreatment Yield strength Rp0.2 Tensile strength Rm Elongation A (L0=5d0) Impact work ISO-V KV J MPa MPa % +20 °C –50 °C aw 700 750 18 120 47 sr 690 740 19 120 47 Operating data Polarity: DC ( + ) Redrying: 300 – 350 °C / 2 h (572 – 662 °F) ? (mm) 2.5 3.2 4.0 5.0 L mm 350 350 450 450 Amps A 70 – 100 90 – 140 140 – 190 180 – 250 Approvals TüV (00548), DB (10.132.35) ABS, BV, DNV, GL, WIWEB (für HY100 + Suprafort700), CE
