韓國高麗T-100低碳鋼焊絲
南宮市中泰焊接材料有限公司18830977733
E2209T1-1/4
-
-
K-329T is formulated for MAG welding of 23%Cr-9%Ni-3%Mo duplex stainless steels.The principal area of application is chemical plant and shipbuilding as well as nuclear plant industries.
E347T1-1
YF347C
YF347C
K-347T is formulated for MAG welding of 18%Cr-8%Ni-Nb stainless steels.
EC409
-
-
K-409TiT is developed to meet the needs of the auto-motive exhaust fabricators that desired a metal cored wire. It excels in the pulsed GMAW mode.
E410T0-1/-4
YF 410C
YF 410C
K-410T is designed for MAG welding of martensite stainless alloys of the 13%Cr types. It is used for surfacing of sealing faces of valves for gas,water, and steam piping system at service temperatures up to 450∑
E410NiMoT0-4
-
-
K-410NiMoT is designed for MAG welding of soft-martensite stainless alloys of the 13%Cr-4%Ni-Mo types.
E430T0-G
YF430G
YF430G
K-430T is designed for MAG welding of ferrite stainless alloys of the 17%Cr-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
-
-
-
K-436T is designed for MAG welding of stainless steels of the 17%Cr-1% Mo-Ti types. It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
-
-
-
K-439T is designed for MAG welding of stainless steels of the 18%Cr-1%Ti types.It is suitable for automotive exhaust fabricators such as front pipe, bellows, flange,
E309LT0 -1/-4
YF309LC
YF309LC
K-309LF is designed for MAG welding of low carbon 22%Cr-12%Ni stainless steel. Dissimilar joint welds ; of and between high-strength, mild steels and lowalloyed QT-steels, stainless, ferritic Cr-and austenitic Cr-Ni-steels, manganese steels. Cladding ; for the first layer of corrosion resistant weld claddings on ferritic-perlitic steels in boiler and pressure vessel parts up to fine-grained steel S500Nbo
E316LT0-1/-4
YF316LC
YF316LC
K-316LF is designed for MAG welding of low carbon 18%Cr-12%Ni-2%Mo stainless steel.bo
